Солнечная агароза (Низкоплавкий гель)

Информация о товаре

• КАС: 9012-36-6
• Английское имя: Агароза (Низкоплавкий гель)
• Оценка: Biotech Grade
• Единица: Бутылка
• Появление: White Powder
• Хранилище: РТ (Комнатная температура)
• Срок действия: 4 годы
• Спецификация: 2.5г, 5г, 100г

Important Notes on Agarose Dissolution and Coagulation

Proper heating is essential for the complete dissolution and coagulation of agarose. Here are the recommended steps for preparing agarose gels correctly:

1. Quick Dissolution: Agarose dissolves quickly when heated.
2. Hydration in Buffers: Agarose does not dissolve directly in TAE or TBE buffers. Upon heating, agarose particles hydrate and form a solution. The hydration process is time-dependent, and the points of hydration vary for different agaroses. Due to its high purity and ultrafine particles, agarose is ideal for electrophoresis. It hydrates faster than other types, so prolonged boiling can lead to overly thick gels that are difficult to mix and prone to breaking.
3. Melting and Gel Temperatures:
   • Melting Point Range: 62-68℃
   • Gel Temperature (1.0%): 24-29℃

Agarose Gel Preparation (1% Concentration with 1×TBE Solution)

1. Подготовка: Use a conical flask with a volume 2-4 times that of the gel liquid. Slowly add agarose to the buffer while stirring to prevent clumping. Record the total weight of the flask and solution.
2. Initial Heating: Microwave on high for 30 секунды, adjusting the time based on the solution’s volume. Heating time varies with the microwave, flask size, and agarose concentration.
3. Mixing: Shake the agarose solution.
4. Second Heating: Microwave again on high for 30 секунды, then shake.
5. Boiling: Microwave on high until boiling (о 10-35 секунды). Use caution to prevent burns as agarose may boil violently when moved. Let it cool at room temperature for 1-2 минуты, shaking gently to release bubbles.
6. Final Heating: Microwave on high until boiling for about 15 секунды. Observe the solution; if particles remain, repeat this step until all crystals dissolve.
7. Reweigh and Adjust: After complete dissolution, reweigh the flask and solution. Add water to match the original weight and mix well.
8. Pouring the Gel: Pour the gel when the liquid cools to 50-55℃ for uniform gel aperture and to avoid damaging the gel apparatus. Shake gently to release the remaining bubbles.
9. Setting the Gel: Pour the gel into the mold, ensuring a thickness of 3-5mm. Eliminate any bubbles between comb holes or at the bottom. Allow it to set at room temperature for 30-45 минуты.

Preparing Different Gel Concentrations and Volumes

1. Mixing: Shake the gel solution at least twice before boiling.
2. Observing: After boiling, check the solution’s state every 10-15 секунды (interval depends on concentration and volume).

Примечание: Product information may be updated. Please refer to the actual label for the most accurate details.