Kit per il dosaggio del contenuto di albumina Solarbio (Colorimetria del verde bromocresolo)

Panoramica del Prodotto

Specifica	Dettagli
Validity Period	6 mesi
Magazzinaggio	2-8℃
Unità	Box
English Name	Albumin Content Assay Kit (Colorimetria del verde bromocresolo)
Detection Method	Spettrofotometro/lettore di micropiastre
Specifica	100T/96S

Product Components

Nome del reagente	Specifica	Condizioni di conservazione
Soluzione di estrazione	Liquido 110 bottiglia ml × 1	2-8℃
Reagente uno	Liquido 0.28 mL×1 vial	2-8℃
Reagente due	Liquido 25 bottiglia ml × 1	2-8℃
Reagente tre	Liquido 0.3 mL×1 vial	2-8℃
Soluzione standard	Liquido 1 mL×1 vial	-20℃

Preparazione della soluzione:

1. Color Development Solution:
   • Prepare the color development solution according to the number of samples by mixing Reagent One, Reagente due, and Reagent Three in the ratio of 10μL: 990μL: 10μL (1010μL for 5 tests). Mix thoroughly and use immediately.
2. Soluzione standard:
   • Preparare un 10 mg/mL albumin standard solution. Prima dell'uso, take 200μL of the 10 mg/mL albumin standard solution and add 200μL of the extraction solution to prepare a 5 mg/mL albumin standard solution. Mix thoroughly and use immediately.

Descrizione del prodotto:

• Albumin:
  • The liver synthesizes the main protein in human plasma.
  • An important nutrient that maintains plasma osmotic pressure.
  • Binds with various nutrients, hormones, and drugs.
  • Reflects the nutritional status of the body.
  • Used to screen for diseases affecting liver metabolic function (per esempio., cirrhosis, liver damage, malnutrition, malignant tumors).
• Detection Method:
  • In a pH 4.2 buffer solution, serum albumin carries a positive charge.
  • In the presence of a non-ionic surfactant, albumin binds with the negatively charged dye Bromocresol Green.
  • Forms a blue-green complex.
  • The complex has an absorption peak at a wavelength of 630 nm.
  • Color intensity is directly proportional to the concentration of albumin.
• Reaction:
  • Albumin + Bromocresol Green → Blue-Green Complex (630 nm)

Nota:

• Before the experiment, selecting 2-3 samples with expected large differences is recommended to conduct a preliminary experiment.
• If the sample absorbance is not within the measurement range, diluting or increasing the sample volume is recommended for detection.

Required Instruments and Supplies (to be prepared):

• Visible spectrophotometer/microplate reader
• Low-temperature centrifuge
• Equilibrio analitico
• Microglass cuvettes/96-well plates
• Adjustable pipettes
• Mortar/homogenizer/ultrasonic cell disruptor
• Ice and distilled water

Procedura:

Elaborazione del campione (The sample volume can be adjusted accordingly; specific ratios can be referenced from literature):

1. Tissue Samples:
   • Add extraction solution in a ratio of sample mass (G) al volume della soluzione di estrazione (ml) Di 1:5~10 (recommend weighing 0.1g of the sample and adding 1.0mL of extraction solution).
   • Homogenize the sample in an ice bath, then centrifuge at 4℃, 8000g per 10 minuti.
   • Discard the pellet and keep the supernatant on ice for testing.
2. Bacterial/Cell Samples:
   • Add extraction solution in a ratio of bacterial/cell count (10^6) al volume della soluzione di estrazione (ml) of 5~10:1 (recommend adding 1.0mL of extraction solution to 5 million bacteria/cells).
   • Disrupt the bacteria/cells in an ice bath using an ultrasonic cell disruptor (power 200W, ultrasonicate for 3s, intervallo 7s, tempo totale 5 minuti).
   • Centrifuge at 4℃, 8000g per 10 minuti.
   • Discard the pellet and keep the supernatant on ice for testing.
3. Liquid Samples:
   • Measure directly.
   • If the liquid is turbid, centrifuge and use the supernatant for measurement.

1. Preparation of Visible Spectrophotometer/Microplate Reader:
   • Preheat the visible spectrophotometer/microplate reader for at least 30 minuti.
   • Set the wavelength to 630 nm.
   • Zero the visible spectrophotometer with distilled water.
2. Operation Table (Add the following reagents to micro glass cuvettes/96-well plates):

Nome del reagente (μL)	Provetta	Tubo standard	Tubo vuoto
Campione	20	–	–
Soluzione standard	–	20	–
Soluzione di estrazione	–	–	20
Color Development Solution	200	200	200

• Mix well and let stand at room temperature for 20 secondi.
• Measure the absorbance of each tube at 630 nm, recording the values as A_test, A_standard, and A_blank.
• Calculate ΔA_test = A_test – A_blank, and ΔA_standard = A_standard – A_blank.
• Note that the blank tube and standard tube only need to be measured 1-2 volte.

Nota: The length of the standing time can affect the detection results. It is recommended to react directly in the micro glass cuvettes/96-well plates for 20 seconds and then measure the absorbance.

Albumin Content Calculation

1. Calculation by Sample Protein Concentration

Albumin content (Mg/mg Prot) = ΔA measured × (C standard ÷ ΔA standard) × V sample ÷ (V sample × Cpr) = 5 × ΔA measured ÷ ΔA standard ÷ Cpr

2. Calculation by Sample Mass

Albumin content (mg/g di massa) = ΔA measured × (C standard ÷ ΔA standard) × V sample ÷ (W × V sample ÷ V sample total) = 5 × ΔA measured ÷ ΔA standard ÷ W

3. Calculation by Bacterial/Cell Number

Albumin content (mg/10^6 cells) = ΔA measured × (C standard ÷ ΔA standard) × V sample ÷ (V sample × N ÷ V sample total) = 5 × ΔA measured ÷ ΔA standard ÷ N

4. Calculation by Liquid Volume

Albumin content (mg/ml) = ΔA measured × (C standard ÷ ΔA standard) × V sample ÷ V sample = 5 × ΔA measured ÷ ΔA standard

Definitions:

• C standard: Standard tube concentration, 5 mg/ml;
• V sample: Sample volume added, 0.02ml;
• V sample total: Total extract volume added, 1ml;
• Cpr: Concentrazione proteica del campione, mg/ml;
• W: Sample mass, G;
• N: Total number of bacteria/cells, in 10^6

Appunti:

1. If ΔA_test is less than 0.010 or the absorbance of the test tube is close to that of the blank tube, you can increase the sample volume before measurement. If ΔA_test is greater than 0.5, it is recommended to appropriately dilute the sample supernatant with extraction solution before measurement. Note to simultaneously adjust the calculation formula.
2. If the sample becomes turbid after adding the color developer, it is recommended to appropriately dilute the sample supernatant with extraction solution before measurement. Note to simultaneously adjust the calculation formula.

Esempio sperimentale:

1. Take 20μL of human serum sample, dilute it 10 times with extraction solution, follow the measurement steps, and measure it using a 96-well plate. Calcolo: ΔA_test = A_test – A_blank = 0.426 – 0.124 = 0.302, ΔA_standard = A_standard – A_blank = 0.406 – 0.124 = 0.282. Calculated based on liquid volume: Albumin Content (mg/ml) = 5 × ΔA_test ÷ ΔA_standard × 10 (dilution factor) = 53.546 mg/ml.